Actually it is not only suitable to the 350D, 450D …
It can works in every Canon EOS series as long as it is able to support the 2.5mm audio jack(stereo type).
This Remote Control is able to focus with the shutter line, shooting (shutter release)
In addition, to support the control of shutter B ,too.
you can get it at the market too.it named:CanonRS-60E3 Remote Control.
Search on the Internet, then found that a very simple circuit to make it!
So,let start it!!
The necessary materials ~
Wires, circuit boards,
1 On Off switch, 2 tag switch, 2.5mm audio jack(stereo type), 1 Card Reader case,
glue+glue gun
Total cost～RM5.00+— (Roughly equivalent to USD1.50)very very cheap.Is ‘t it??
But ,i really feel very satisfied of this diy work!!
i draw a circuit here.Please refer it before starting your work!
circuit~
Production steps~（by picture）
1.Link those wires .
2.Fix them by the glue.
3.Fit back the cover.
4.Cut a piece of circuit board out by following the Card Reader case’s shape.
5.Make sure that the circuit board’s size is right.
6.Fit in the On Off switch and tag switchs.
7.Link the other side’s wires by refering to the circuit~ again.
8.Fitting the wires by tie it up.
9.Repeat step(8) at the front side,too.
10.Soldering all the wires part.
11.Put some glue at the card reader case.
12.Put (10)circuit boards inside it.Make 3 holes at the top of that case.
13.Finally,shut the case.
This is my personal unique Remote Control!Is it cool??
**If you don’t have this type of card reader cases,you can just use another type of boxes.For exsample ~this is a film box!
Do you know how can we use this Remote Control??I ‘ll tell you next time!!Stay tune!!
